黑龙江风冷冷水机组二手制冷设备规格反复述说
黑龙江风冷冷水机组规格，二手制冷设备的反复述说。全新造型的TY-08A系列工业风冷冷水机主要适用于塑胶行业，它可以控制塑胶成形模具温度以缩短成型周期，加速产品定形；该系列运用冷热交换的原理进行冷却，可快速降温，温控稳定。且不受环境因素的影响，是现代工业中不可或缺的配置设备。风冷冷水机和水冷cold water machine用于户外安装和操作。风冷机是直接由空气被机械地传阅，机器的冷凝盘管，直接驱逐热量大气空气cold water machine. 冷却机相似，只是它们在实施cold water machine线圈的water mist，以帮助cold water machine cold to cold water machine比传统的air efficiency.
结构与组成 主要部件为cold water tank（一般machine自带）、pump（一般machine自带）、machine、cooling cooling equipment and linking pipes. 安装非常简单，连接pipes and power later (380V)即可正常使用.
Cold condenser: 在制cooling process中,cold condenser起着输出heat energy并使cooling agent得以condense作用. 从cooled by air pressure over-heated steam进入coldspring后，将其在工作过程吸收了全部热量，其中包括从evaporator and cooled by air compressor in the pipeline所吸收到的热量都传递给周围介质（water or air）带走; cool agent high pressure over-heated steam重新凝结成了液体。（根据cooling medium and cooling method不同,cold condenser可分为三类：wind-cooled condensers, wind-cooling type of condensers, evaporative cooling type of condensers.)
Storage container: Storage container installed after the cold coil, with the exhaust pipe from the cold coil is directly connected. Cold coil's cool agent liquid should flow freely into storage container inside, so that can fully utilize the heat transfer area of the cold coil. On the other hand, when evaporation rate changes due to thermal load change on evaporator side, amount of cool agent liquid needed also changes accordingly then storage container serves as a regulator and reservoir for cool agents used in refrigeration systems.
Evaporator: Evaporator is based on principle that absorbs heat from being cooled medium through boiling (actually boiling) process using refrigerant fluid to maintain continuous operation under stable conditions while preventing overheating caused by excessive heat absorption which may lead to damage or malfunction of system components such as valves or pumps etc., requiring periodic maintenance check-ups & cleaning routine schedule operations during use period; regular inspection required for ensuring proper functioning without leaks before it gets too late!
